2023年6月24日发(作者：)

v1.0 可编辑可修改 does the alert number 820 indicateA. AIS lostB. TT lostC. Navtex message receivedD. Cross track alarm2. What does the alert number 450 indicateA. Route: Illegal To WPTB. RADAR comm. Error

C. LAN adapter version error D. Heading sensor not available3. What does the alert number 495 indicateA. Anchor watch errorB. Track control stoppedC. Steering parameter error D. Filter: Init.

4. What does the alert number 380 indicateA. Route: File read errorB. User chart: File not foundC. AIS COM errorD. User chart: File read error5. What does the alert number 635 indicateA. No official dataB. Log errorC. Dual axis log (WT) errorD. Dual axis log (BT) error6. What does the alert number 640 indicateA. Datum mismatch1 v1.0 可编辑可修改B. Chart align: Over 30 min.C. RADAR antenna ID errorD. Gyro error (Trackpilot)7. What does the alert number 031 indicateA. Sensor adapter 1 COM timeoutB. Sensor adapter 2 COM timeoutC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout8. What does the alert number 257 indicateA. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM error9. What does the alert number 470 indicateA. WGS 84 not usedB. Different geodetic datumC. Sentence syntax errorD. Datum change10. Where do you control the settings and visibility of the chart layersA. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Basic Setting 11. Where do you set the Safety DepthA. In Chart LegendB. In Symbol DisplayC. In Chart Alert2 v1.0 可编辑可修改D. In Chart Display12. Where do you set the Shallow ContourA. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display do you set the Deep ContourA. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display do you set the Safety ContourA. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display15. Where do you set the Shallow PatternA. In Chart DisplayB. In Symbol DisplayC. In Basic SettingD. In Chart Catalogue16. Where do you control the AIOA. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Chart Catalogue do you select the color Palette used to display the charts3 v1.0 可编辑可修改A. In Chart LegendB. In Chart DisplayC. In Quick Access BarD. In Chart do you switch between Multicolor and Two Color settings for the chartsA. In Chart LegendB. In Symbol DisplayC. In Basic SettingD. In Chart Display19. When an ENC is outlined in Green in the Chart Catalogue - it meansA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. License is not available or has expired.20. When an ENC is outlined in Orange in the Chart Catalogue - it meansA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.21. When an ENC is outlined in Magenta in the Chart Catalogue - it meansA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.22. When an ENC is outlined in Yellow in the Chart Catalogue - it meansA. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.4 v1.0 可编辑可修改C. License is valid - up-to-date status doubtful.D. License is not available or has expired.23. When an ENC is outlined in Red in the Chart Catalogue - it meansA. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is valid - up-to-date status doubtful.D. License is not available or has expired24. When an ENC is outlined in Blue in the Chart Catalogue - it meansA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.25. Where can you find information concerning the charts stored on the HDDA. On the Internet.B. The Chief Officer will know.C. In the chart catalogue.D. In the Chart Display menu.26.

How can you tell if your FURUNO ECDIS is displaying an ENCA. There is an "ENC Data available" indication in the Own Ship Functions Box.B. There is an "RNC data" indication in the Own Ship Functions Box.C. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.D. There is no special indication in the Own Ship Functions Box.27.

Where do you find information on Magnetic Variation in the ENCs on the FURUNO ECDISA. In Chart DisplayB In Chart CatalogueC In Chart AlertD In Chart Legend5 v1.0 可编辑可修改28.

Which information can you find in the Vector Chart LegendA Magnetic VariationB Base CD numberC Permit expiration dateD Safety Contour setting29.

Which information can you find in the Vector Chart LegendA T&&P NoticesB NameC WarningsD Safety Contour setting30.

Which information can you find in the Vector Chart LegendA Notices To MarinersB Presentation Library edition numberC Chart edition && Update dateD Safety Contour setting31.

Which information can you find in the Raster Chart LegendA Magnetic VariationB Safety Contour settingC Quality of dataD T&&P Notice information can you find in the Raster Chart LegendA Horizontal datumB Safety DepthC User Permit numberD License information can you find in the Raster Chart LegendA Shallow Contour6 v1.0 可编辑可修改B Chart NameC Chart Viewing dateD Deep Contour34. Which information can you find in the Raster Chart LegendA Edition numberB Last displayed updateC Edition dateD Update issue date35.

How do you switch from Vector chart to Raster chart on the FURUNO ECDISA I select Raster chart in the Main menu.B I select RNC in the Chart Legend.C I select Raster chart from the drop down list in the Status Bar.D I select RNC in the Chart Catalogue.36.

How do you switch from Raster chart to Vector chart on the FURUNO ECDISA I select ENC in the Main menu.B I select Vector chart in the Chart Legend.C I select Vector chart from the drop down list in the Status Bar.D I select Vector chart in the Chart Catalogue. do you get information on an ENC object (Buoy - Beacon - Berth etc.) on the FURUNO ECDISA I right click on the User Chart function in the route planning tool.B I click on the Chart Info in the Instant Access Bar.C I center click on the object.D I right click on the object.38 How do you record Own Ship's position

observation from your RADARA I cannot record own ship's position manually on the FURUNO ECDIS.B I record LOP in the Record function of the Event the ECDIS charts when you have a Range/Bearing

7 v1.0 可编辑可修改C I press the [CTRL] && [ACQ/ACT] button on the Control Unit.D I select [Record][Event Log] and [User Event] from the Instant Access bar and insert

the observation in the Record User Event window.b39 Which operation can you perform on the FURUNO ECDISA I can record target ship's positions in the Voyage log automatically.B I can record a position fix manually by using just one distance and one bearing.C I can playback my past voyage track on the charts.D I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display on

the GPS.40 Which operation can you perform on the FURUNO ECDISA I can record my position manually on the ENCs.B I can set the ECDIS to automatically

of Ship's maximum draft.C I can set Ship's maximum height to enable chart alerts from areas in the charts

where there is not sufficient air draft.D I can send a copy of my Route Plan to an AIS target as a Safety Message.41Which operation can you perform on the FURUNO ECDISA I can play back my ship's past track on the ECDIS.B I can record my position manually on the RNCs.C I can create Notes from my Voyage Log to document a voyage on the charts.D I can set the ECDIS to include engine log information into the Voyage log

automatically.b142How do you document your previous voyage on the FURUNO ECDISA I use my paper Logbook as ng a Safety Contour based on my setting

8 v1.0 可编辑可修改B I use my paper Logbook and my VDR or SVDR as documentation.C I use the tracking function in the symbol display.D I show a playback of my past voyage track on the charts.43 Which operation can you perform during a voyageA I can use the Event function to record special events in the Event Log.B I can create a User Chart from the Alert Log and save it to a USB memory device.C I can create a User Chart from the Chart Usage Log and save it to a USB memory

device.D I can create a User Chart from the Voyage Log and save it to a USB memory device.44Which operation can you perform during a voyage or after completion of a voyageA I can use the Event function to record special events in the Details Log.B I can view and print a copy of the Voyage Log.C I can create a backup copy of Own Ship's past track (120 minutes max.) on a USB

memory device and keep the copy in a safe location for future reference.D I can reset the Chart Usage Log after creating a backup copy.45Which operation can you perform during a voyage or after completion of a voyageA I can use the Record function to record special events in the Voyage Log.B I can create and save a screen shot for future reference.C I can view and print a copy of the Details Log.D I can connect the ECDIS to the Internet

storage.46Which operation can you perform after completion of a voyageA I can add additional records of manual positions to the Voyage Log adding further

detail to the past Voyage.B I can create a User Chart from the monitored Route Plan and save it to a USB memory

device.C I can create a backup copy of the Voyage log on a USB memory upload all documentation to an external

9 v1.0 可编辑可修改D I can view and print a copy of the Chart Usage Log.47Which recording function is available in the FURUNO ECDISA Danger Targets LogB Engine LogC Speed LogD GPS Log48 Which recording function is available in the FURUNO ECDISA AIS LogB Engine LogC Voyage LogD RADAR Log49Which recording function is available in the FURUNO ECDISA Gyro LogB Engine LogC Ship's LogD Details Log50How do you manually record Own Ship's current position in the LogsA By opening the Voyage Log and entering the current position.B By right clicking on own ship icon on the user interface.C By pressing the Record button on the Control Unit.D By using the record position event function of the Event Log.51What is a Manual UpdateA A Manual update is an update applied using the Manual function in Load && Update

Charts.B A Manual update is an update to the charts created by the operator from information

received from the Pilot - a Navtex message - a VHF broadcast etc.10 v1.0 可编辑可修改C A Manual update is an update applied to the charts by an official representative

of the chart producer.D A Manual update is a chart created using the digitizer function of the FURUNO ECDIS.52How do you delete a specific object added using the Manual Update functionA I select Clear in the Manual Update window.B I use the Delete function in the File Export tool.C I right click on the object and use the Manual Update window to delete it.D I set the View Until date for the Manual Update two months back in time.53How do you modify an existing Manual Update objectA I use the ENC tab of the Chart Maintenance function.B I use the Mariner tab of the Symbol Display function.C I cannot modify a Manual Update - only delete it.D I use the List tab of Manual Update tool function.54How can you see if a chart object is created using Manual UpdatesA The Manual Update will be larger than any other chart objects.B It is always shown in red.C It will have a special orange marker.D There is no way I can see if a chart object is created using Manual Updates.55Which color scheme is used for a Manual update on the Furuno ECDISA Blue ENC symbolsB Standard ENC symbolsC Orange ENC symbolsD Red ENC symbols56 Where can Manual Updates be displayedA Only on ENCsB Only on RNCsC Only on Vector charts11 v1.0 可编辑可修改D On all types of charts in the ECDIS57 Where can you find a list of the Manual Updates that have been applied to the Furuno

ECDISA In the Chart LegendB In the Manual Update WindowC In the Chart CatalogueD In the Chart Display menu58How do you hide (not delete) a Manual Update objectA I select Clear from the Manual Updates menu.B I select Undo Last from the Manual Updates menu.C I deselect that general type of chart object in the Chart Display dialogue.D I deselect the option from the Symbol Display dialogue.59Which Manual Update objects can be hidden from view by operator selectionA Only the Manual Updates Special Areas (from the Chart Display dialogue)B All manual Updates objects(from the Chart Display dialogue)C Only the Manual Updates Buoys (from the Chart Display dialogue)D Only the Manual Updates Soundings (from the Chart Display dialogue)60 Can you create a Manual Update from an AIS Safety Message shown on the ECDISA Yes - by manually creating the object.B Yes - by letting the ECDIS create the object automatically.C Yes - either by creating

D No61Can you create a Manual Update from a Navtex Message shown on the ECDISA Yes - by manually creating the object.B Yes - by letting the ECDIS create the object automatically.C Yes - either by creating

D Noit manually or letting the ECDIS create it manually or letting the ECDIS create it automatically.12 v1.0 可编辑可修改62Where do you change the visibility of your Monitored routeA In Chart LegendB In Symbol DisplayC In Chart DisplayD In Chart Catalogue63Where can you update the ENCsA In the Chart Manager (Individual Update)B In the Update function of the Chart DisplayC In the Update function of the System SettingsD In the Update function of the Chart Legend64Where can you update the RNCs on the Furuno ECDISA In the Update function of the MenuB In the Chart Manager (Individual Update)C In the Update function of the Chart CatalogueD In the Update function of the Chart Legend65How do you update your vector charts on the Furuno ECDIS using the ENC Update CDA I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I create a User Chart.D I import the information using the

66How are regular T&Ps updated on the ECDISA T&&Ps must always be created as Manual Updates.B I create a Manual Update containing the T&&Ps using the Manual function in the

Load && Update function of the Chart Menu.C Most T&&Ps are included in the weekly update CD and these are updated automatically

together with the other updates on the CD.D I cannot update T&&Ps on the FURUNO Details function in the Chart Catalogue.13 v1.0 可编辑可修改67How do you update your raster charts on the Furuno ECDIS using the RNC Update CDA I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I cannot update the raster charts using an RNC update CD.D I import the information using the Chart Details function in the Chart Catalogue.68How are loaded ENCs converted into SENCs when updatingA The FURUNO ECDIS will normally convert the ENCs to SENCs automatically.B I must use the conversion tool from the Menu.C I cannot convert ENCs into SENCs.D I load the new Permit file using the file named and then I use the S52 Presentation

Library from the System menu in the Chart Menu to convert the ENCs into SENCs.69What is the recommended loading sequence when you receive new charts - updates and

permitsA There is no recommended sequence.B #1:Base CDs #2:Update CD #3:PermitC #1:Permit #2:Update CD #3:Base CDsD #1:Permit #2:Base CDs #3:Update CD70How do you select which User Chart to monitorA By linking it to the monitored Route Plan in the route planning tool.B By clicking Display - User Chart in the Quick Access Bar.D By left clicking on the chart area.71Where can you enter informative notes on Pilot data (VHF channels etc.) to be used

during monitoring in the FURUNO ECDISA In the Voyage LogB In the Pilot DataC In the User Event functionD In the User Chart14 v1.0 可编辑可修改72How do you enter informative notes in the User ChartA I select Note as an option for the Area Line or Circle

be displayed.B I select Note as an option for the Tidal Label or Clearing Line where the information

should be displayed.C I select User Chart from the Main menu and then I select Plan and enter the note

to be displayed.D I left click on Route in the Quick Access Bar and then I select Monitor.73How do you change the User Chart being used for monitoringA I move the monitored route plan to planning mode and edit the Linked User Chart

setting.B I select a different user chart from the Menu to monitor.C I select User Chart from the Planning sidebar and then I select Monitor for the

desired user chart.D I left click on User Chart in the Status Bar and then I select Plan.74Can you move your User Chart from one FURUNO ECDIS to anotherA NoB Yes but only by using the harmonization process.C Yes by using the Export/Import tool in the Settings function of the Status Bar.D Yes but only to an ECDIS with the exact same software version number.75Which printing option is available for the User ChartA Tidal ReportB Full reportC System reportD Detailed report76Which printing option is available for the User ChartA Full reportwhere the information should

15 v1.0 可编辑可修改B Line ReportC System reportD Detailed report77Which printing option is available for the User ChartA Full reportB System reportC Clearing Line ReportD Detailed report78Which printing option is available for the User ChartA Full reportB System reportC Detailed reportD Area Report79 Which printing option is available for the User ChartA Circle ReportB Full reportC System reportD Detailed report80Which printing option is available for the User ChartA Label ReportB Full reportC System reportD Detailed report81Where can you display your planned or monitored User Chart on the FURUNO ECDISA Only on official chartsB On all chartsC Only on vector charts16 v1.0 可编辑可修改D Only on raster charts82How can you verify which User Chart is being monitoredA The name of the User Chart will be displayed in the top right corner of the ECDIS

screen.B The name of the User Chart will be displayed in the Information Sidebar.C By clicking on "Route" and then on "Route Info" in the Quick Access Bar when in

Plan mode.D By clicking on "Route" and then on "Route Info" in the Quick Access Bar when in

Navi mode.83What is the name of category of charts generated by the user to draw up contingency

areas - No Go areas - clearing lines etc.A Private ChartB Pilot DataC User ChartD Non HO Chart84How do you open the User Chart planning toolA I select "Planning" and then "User Chart" in the Quick Access bar when in Plan

mode.B I select "Planning" and then "User Chart" in the Quick Access bar when in Navi

mode.C I Select Manual Update from the Menu in Charts mode.D I left click on User Chart in the Information sidebar - then I select Plan.85Can you edit the User Chart when the ECDIS is in Navi modeA YesB Only if the User Chart is not linked to a route plan.C Yes if the User Chart contains no Tidal information.D No17 v1.0 可编辑可修改86What is a Point in the User ChartA A point is used to create a Manual Update from a chart object.B A point is used to denote/highlight the position of a chart object with the User

Chart.C A point is the end of a User Chart.D A point is used to connect the User Chart with a route plan.87 Can you copy your Manual Updates from one FURUNO ECDIS to anotherA NoB >Yes - by using the Backup and Restore dialogue to transfer the Manual Updates

to a USB.C Yes - by sending the Manual updates via an email.D No - but I can transfer them to another manufacturer's type of ECDIS.88 When do you use a Manual UpdateA Always when I have to update my charts.B When I receive information which must be displayed on my ECDIS and this is not

yet included in the official weekly updates.C I should never use Manual Updates.D >When I have to update the software of the ECDIS.89 How do you add navigational chart objects to the FURUNO ECDIS when you are required

to do so by Notices To MarinersA I cannot add any chart objects to the ECDIS unless they are included in the weekly

update CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.90 How do you add navigational chart objects to the FURUNO ECDIS when you are required

to do so by a Navtex message18 v1.0 可编辑可修改A I cannot add any chart objects to the ECDIS unless they are included in the weekly

update CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.91 How do you add navigational chart objects to the FURUNO ECDIS when you are required

to do so by information received via VHF broadcastA I cannot add any chart objects to the ECDIS unless they are included in the weekly

update CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.92 How can you verify which route is being monitoredA The name of the route will be displayed on my own ship vector.B The name of the route will be displayed in the Route Information box.C By right clicking on own ship icon.D I cannot get information on the route which is being monitored.93 How can you verify which route is being monitoredA By clicking on "Route" and then on "Route Info" in the Quick Access Sidebar in

Plan mode.B The name of the route will be displayed in the Status Bar.C By clicking on "Route" and then on "Route Info" in the Quick Access Sidebar in

Navi mode.D I cannot get information on the route which is being monitored.94 Can you monitor a route even though it indicates

the Route Plan Checkan active Alert when you have completed

19 v1.0 可编辑可修改A Yes - the only thing preventing me from monitoring would be an Impossible Turn

message in the WPT tab.B Yes - if I enter the Service Safety Password.C NoD It depends on the type of Alert generated (Safety Contour - Restricted

Area etc.).95 What should you remember to set up before planning a routeA The settings for the Voyage LogB The Alarm Level in the Operation submenu.C The Conning Display in Installation Parameters.D The Chart Viewing Dates96 What should you remember to set up first when planning a routeA The settings for the Voyage LogB The Alarm Level in the Operation submenuC The Safety Contour in the route planning toolD The Radar overlay97 How do you save your route to the Hard Disc Drive when it has been editedA I don't. The route is automatically saved to the hard disc drive whenever changes

are applied.B I click on Save or Save As in the Route Planning tool.C I select Save in the Backup and Restore dialogue.D I click New in the Route Planning tool.98 How do you start the route planning toolA I press Plan on the Control Unit.B I click on the Route icon in the Status bar.C I select Route Plan from the Menu dialogue.D I click on Route in the Quick Access - Caution

20 v1.0 可编辑可修改99 Can you open the route planning tool when the ECDIS is in Chart modeA Yes if I open the Menu dialogue first.B Yes if I right click on the chart and select Event.C Yes if I select Plan in the Chart Catalogue.D No100 Where do you set up the Safety Contour used for planning your routeA On the Parameters tab of the Route Planning tool.B In Chart DisplayC In Chart Alert settingsD In Own Ship settings101 Can you set the overall maximum speed for a route planA Yes in the Ship and Route parameters of the Menu.B Yes in Chart Display.C Yes in Optimization parameters.D Yes in the route planning tool.102 Can you plan a route while you monitor another routeA NoB Yes but only if I have two ECDIS.C Yes the route planning function is independent from the route monitoring function.D Yes but I must select the same Safety Contour for both route plans.103 Can you edit a route without removing it from the route monitoring functionA NoB Yes but I must copy it to another ECDIS where it can be edited without interfering

with the monitoring function of the FURUNO ECDIS.C Yes if I create a copy of the route plan in ANTS format on a USB and edit the file

on a normal office PC.21 v1.0 可编辑可修改D Yes if I select Copy from monitor in the Route plan menu and edit the copy. When

copying is completed I select-Exchange with monitor in the Route Plan menu.104 Which operation can you perform with the FURUNO ECDISA I can send my Route Plan and User Chart to any RADAR for display on the RADAR.B I can send my Route Plan and User Chart to any AIS for display on the AIS.C I can send my Route Plan and User Chart to any GPS for display on the GPS.D I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR.105 Where can you change the setting of the Safety Contour which is used during planning

of a routeA Nowhere - because I must never change the setting for the Safety Contour.B In the Settings menu and I can only change the setting

C In Chart AlertD In the route planning tool.106 Where can you change the settings for the Safety Contour used for monitoringA Nowhere - because I must never change the setting for the Safety Contour.B In the Settings menu and I can only change the setting

C In Chart Alert.D In the route planning tool.107 Where do you control the Safety Contour displayed on the

A In Chart AlertB In the route planning tool - on the Alerts tabC In Chart DisplayD No where - it is set up automatically108 What is Kalman filter in the FURUNO ECDISA The Kalman Filter is a noise filter which improves the precision of the charts.B The Kalman filter is a filter which reduces the time it takes for the ECDIS to

start on the FURUNO ECDISif I have the service I have the service password.22 v1.0 可编辑可修改C The Kalman Filter is a filter which continuously monitors the status and validity

of the navigation sensor inputs.D The Kalman Filter is a filter which continuously monitors the connection to the

RADAR GPS and AIS.109 Which of these settings generate an alarm from the Chart Alert settingA Shallow ContourB Safety DepthC Safety ContourD Deep Contour110 Which ECDIS setting is activated in Ship and Route ParametersA Gyro ErrorB Safety ContourC Notes alarm timesD Ship's minimum speed111 Which ECDIS setting is adjusted in Ship and Route ParametersA Chart alignmentB Safety ContourC Maximum rate of turnD Safety depth112 Which ECDIS setting is adjusted in Ship and Route ParametersA Position offsetB Safety ContourC Alarm volumeD Ship's maximum speed113 Where do you set up the chart watch sector to scan the ENCs for problems along own

ship's heading lineA In Chart Display settings23 v1.0 可编辑可修改B In Chart Alert settingsC In Basic settingsD In Check Area settings114 What is the maximum limit of the Check AreaA No limitB 240min. + 20NM + 5km + 999mC 120min. + 10NM + 3km + 500mD 999min. + 999NM + 999km + 999m115 What should you do if you have to leave your planned route during a voyageA Switch off the FURUNO ECDIS and concentrate on the RADAR.B Disable the route monitoring on the FURUNO ECDIS.C Change the display of the FURUNO ECDIS to IMO All Other.D Configure and enable the Check Area function to assist me in scanning the ENCs

for danger to navigation and hazardous objects.116 How do you switch the Kalman filter on or offA The Kalman filter is always switched on when a route is put into monitor mode and

switched off when there is no route being monitoredB The Kalman filter is always on so I never have to switch it on or off.C The Kalman filter is switched on or off in the Sensor menu on the Position tab.D The Kalman filter is switched on when steering is switched to Autopilot.117 If your primary GPS fails

ECDISA I cannot switch to another position sensor - a service technician is required to

make the switch.B The ECDIS will normally switch to the secondary position sensor automatically if

such is connected to the ECDIS.C I change the position sensor in the Initial Settings submenu.- how do you switch to another position sensor in the FURUNO

24 v1.0 可编辑可修改D I change the position sensor in the Conning Display.118 If your primary GPS fails

ECDISA I cannot switch to another position sensor - a service technician is required to

make the switch.B I change the position sensor in the Chart Display dialogue.C I change the position sensor in the Sensor dialogue of the Menu.D I change the position sensor in the Conning Display dialogue.119 What is the purpose of Kalman FilterA The Kalman Filter is the Antivirus software running on the FURUNO ECDIS.B The filter is used to calculate an astronomical position from several astronomical

- how do you switch to another position sensor in the FURUNO

observations entered by the operator.C The filter continuously monitors the position given by each individual position

sensor to determine if the sensor is reliable or not.D The filter is used to verify the quality of data on the Base and Update CDs.120 How can you reset the trip counterA I can reset the Trip Counter by resetting the Voyage Log in the Reset submenu of

the Record menu.B I can reset the Trip Counter by resetting it in the Voyage tab of the Menu.C I cannot reset the Trip Counter.D The Trip Counter can be reset by deleting

121 How can you reset the odometerA I can reset the odometer from the Voyage tab of the Menu.B I can reset the odometer from the Sensor Setting dialogue.C I can reset the odometer from the Symbol Display dialogue.D I can reset the odometer from the Quick Access sidebar.122 Where do you offset own ship chart position on the FURUNO ECDISit using the Backup and Restore dialogue.25 v1.0 可编辑可修改A In Symbol DisplayB In Chart DisplayC In Chart MenuD In own ship functions box123 Where do you set system priority of multiple GPS connected to the FURUNO ECDISA In the Sensor dialogueB In Basic SettingC In Ship and Route ParametersD In Nav Tools124 Which setting can be changed in SensorsA Log stabilization modeB Safety Contour settingC Safety Depth settingD Kalman Filter setting125 Which setting can be changed in SensorsA Monitored sensorsB System or Local selectionC Symbol Display settingD Conning Display setting126 When the software of the FURUNO ECDIS is being updated - it is important thatA The multiple GPS connected to the ECDIS are updated with the new software version.B That it is done when the ECDIS is not being used for navigation (in port etc.).C The HUBs connected to the ECDIS are updated with the new software version.D The RADAR connected to the ECDIS is not being used (in port etc.).127 When the software of the FURUNO ECDIS is being updated - it is important thatA The software is updated by a FURUNO Service Engineer.B The software is updated by the Captain.26 v1.0 可编辑可修改C The software is updated by the Ship's Electrical Engineer.D The software is updated by an IMO representative.128 When the software of the FURUNO ECDIS is being updated - it is important thatA The software should be loaded from a USB memory device.B The FURUNO ECDIS is put in Standby mode before updating.C You create backup copies of all critical info in the ECDIS before updating.D The ECDIS is disconnected from the RADAR.129 Where do you find information on the presentation library used in the FURUNO ECDISA In the Basic Setting of the MenuB In the Record function of the Quick Access barC In the System Dialogue of the MenuD In the About dialogue130 Where do you find information on the software version of the FURUNO ECDISA In the Voyage LogB In the System dialogue of the MenuC In the About dialogueD In the S52 Presentation library131 Which Operating System is used on the FURUNO ECDISA LinuxB DOSC Windows XPD Windows 8132 Where do you find information on the Conning software version of the FURUNO ECDISA In the Voyage LogB In the System dialogue of the MenuC In the About dialogueD In the S52 Presentation library27 v1.0 可编辑可修改133 Where do you find information on the C-Map SDK (Software Developers Kit) software

version of the FURUNO ECDISA In the Voyage LogB In the System dialogue of the MenuC In the About dialogueD In the S52 Presentation library134 Where do you control the visibility of the user overlays (User Chart -

A In Chart LegendB In Symbol DisplayC In Chart DisplayD In Chart Catalogue135 Where do you change the display of Own Ship Past Track and other user overlaysA In the Information SidebarB In Chart DisplayC In Symbol DisplayD In the Status Bar136 Where do you change the Velocity Vectors styleA In the Quick Access barB In Chart DisplayC In Symbol DisplayD In the Status Bar137 Where do you change the Ship OutlinesA In the Quick Access barB In Chart DisplayC In Symbol DisplayD In the Status Bar138 Where do you change the Target past position density28

- etc.)Route v1.0 可编辑可修改A In the Quick Access barB In Chart DisplayC In Symbol DisplayD In the Status Bar139 Where do you change the Targets colorA In the Quick Access barB In Chart DisplayC In Symbol DisplayD In the Status Bar140 Where do you change the Tracked Target sizeA In the Quick Access barB In Chart DisplayC In Symbol DisplayD In the Status Bar141 Where do you change the visibility of your CirclesA In Chart LegendB In Symbol DisplayC In Chart DisplayD In Chart Catalogue142 Where do you change the visibility of your User ChartA In Chart LegendB In Symbol DisplayC In Chart DisplayD In Chart Catalogue143 Where do you change the visibility of your Planned routeA In Chart LegendB In Symbol Display29 v1.0 可编辑可修改C In Chart DisplayD In Chart Catalogue30