2024年5月18日发(作者：青苹果乐园影院电视剧免费播放)

Set up and use your Powerbeats

3

Wireless earphones

Here's everything you need to know to make the most of your Powerbeats

3

Wireless earphones.

Turn on

Press and hold the power button for 1 second to turn your earphones on or off.

Set up

If the indicator light on your earphones turns on but doesn't flash, your earphones have already

been set up with a device. In that case, follow the steps to connect to a different device.

If you have an iPhone with iOS 10, follow these steps. When you set up your earphones in this way,

they set up automatically with your other devices that are signed into iCloud and using iOS 10,

macOS Sierra, or watchOS 3.

1. Hold your earphones next to your unlocked iPhone.

2. Press the power button on your earphones for 1 second.

3. After a few seconds, your iPhone asks you to connect. If it doesn't, press the power button on

your earphones for 5 seconds.

4. Follow the instructions on your iPhone.

If you have some other Bluetooth device, follow these steps to pair your earphones with that

device:

1. Press the power button for 5 seconds. When the indicator light flashes, your earphones are

discoverable.

2. Go to Bluetooth settings on your device.

3. Select your earphones from the list of discovered Bluetooth devices.

Connect to a different device

Your earphones automatically reconnect to the last device you used with them. To connect to a

different device, follow these steps.

/support/how­to/set­up­and­use­powerbeats3­wireless1/7

iPhone, iPad, or iPod using iOS 10:

1. Open Control Center by swiping up from the bottom edge of the screen.

2. Swipe to the side in Control Center to show the Now Playing card.

3. Tap the device name in the corner of the card, then choose your earphones from the list of

playback devices. If you don't see your earphones, follow the steps for all other devices,

below.

All other devices:

1. Go to Bluetooth Settings on your device. On your Mac, you can just click the Bluetooth icon in

the menu bar.

2. Select your earphones from the list of Bluetooth devices. If you don't see your earphones after

a few seconds, press and hold the power button for 5 seconds.

Charge

Plug your earphones into a power source using the included micro USB cable. Your earphones

provide up to 12 hours of playback from a full charge, and up to 1 hour of playback from a 5-

minute charge.

When your earphones are turned on and set up, the LED indicator light on the left earphone shows

how much listening time is left:

White:

Up to 12 hours left

Red:

Less than an hour left

Blinking red:

Needs to charge

Control

To control audio playback, use the center button on the RemoteTalk cable:

Press once to play or pause audio playback.

Press twice to skip to the next track. Press three times to skip backward.

Press twice and hold on the second press to scan forward through a track. Press three times

and hold on the third press to scan backward through a track.

To control playback volume, use the volume buttons on the RemoteTalk cable. To control call

volume, use the volume controls on your phone.

Press and release the volume up (+) button, or press and hold to increase volume continuously.

/support/how­to/set­up­and­use­powerbeats3­wireless2/7