2023年7月18日发(作者：)

元器件交易网ROCIRCUIT DATA SHEETMJLM101A-X REV 1A0Original Creation Date: 06/21/95Last Update Date: 08/13/02Last Major Revision Date: 01/19/00SINGLE OPERATIONAL AMPLIFIER - EXTERNALLY COMPENSATED

General DescriptionThe LM101A is a general purpose operational amplifier which features improved performanceover industry standards such as the LM709. Advanced processing techniques make possiblean order of magnitude reduction in input currents, and a redesign of the biasing circuitryreduces the temperature drift of input current.

This amplifier offers many features which make its application nearly foolproof: overloadprotection on the input and output, no latch-up when the common mode range is exceeded,and freedom from oscillations and compensation with a single 30 pF capacitor. It hasadvantages over internally compensated amplifiers in that the frequency compensation canbe tailored to the particular application. For example, in low frequency circuits it canbe overcompensated for increased stability margin. Or the compensation can be optimizedto give more than a factor of ten improvement in high frequency performance for mostapplications.

In addition, the device provides better accuracy and lower noise in high impedancecircuitry. The low input currents also make it particularly well suited for long intervalintegrators or timers, sample and hold circuits and low frequency waveform generators.

Further, replacing circuits where matched transistor pairs buffer the inputs ofconventional IC op amps, it can give lower offset voltage and a drift at a lower cost.

Industry Part NumberLM101ANS Part NumbersJL101ABCAJL101ABGAJL101ABHAJL101ABPAPrime DieLM101AControlling Document38510/10103,AMEND.2 CIR.G REV GProcessingMIL-STD-883, Method 5004

oSubgrp Description Temp ( C)12345678A8B91011Static tests at

Static tests at

Static tests at

Dynamic tests at

Dynamic tests at

Dynamic tests at

Functional tests at

Functional tests at

Functional tests at

Switching tests at

Switching tests at

Switching tests at

+25+125-55+25+125-55+25+125-55+25+125-55Quality Conformance InspectionMIL-STD-883, Method 5005

1元器件交易网M101A-X REV 1A0MICROCIRCUIT DATA SHEETFeatures- Offset voltage 3 mV maximum over temperature

- Input current 100 nA maximum over temperature

- Offset current 20 nA maximum over temperature

- Guaranteed drift characteristics

- Offsets guaranteed over entire common mode and supply voltage ranges

- Slew rate of 10V/us as a summing amplifier

2元器件交易网M101A-X REV 1A0MICROCIRCUIT DATA SHEET(Absolute Maximum Ratings)(Note 1)Supply VoltageDifferential Input VoltageInput Voltage(Note 3)Ouput Short Circuit Duration(Note 2)Operating Ambient Temp. RangeMaximum Junction TemperaturePower Dissipation at TA = 25 C(Note 2)H-Pkg (Still Air)H-Pkg (500LF/Min Air Flow)J8-Pkg (Still Air)J8-Pkg (500LF/Min Air Flow)J14-Pkg (Still Air)J14-Pkg (500LF/Min Air Flow)W-Pkg (Still Air)W-Pkg (500LF/Min Air Flow)Thermal ResistanceThetaJAH-Pkg (Still Air)H-Pkg (500LF/Min Air Flow)J8-Pkg (Still Air)J8-Pkg (500LF/Min Air Flow)J14-Pkg (Still Air)J14-Pkg (500LF/Min Air Flow)W-Pkg (Still Air)W-Pkg (500LF/Min Air Flow)ThetaJCH-PkgJ8-PkgJ14-PkgW-PkgStorage Temperature RangeLead Temperature(Soldering, 10 seconds)ESD Tolerance(Note 4)Note 1:+22V+30V+15VContinuous-55 C to +125 C150 C 750mW1200mW1000mW1500mW1200mW2000mW 500mW 800mW165 C/W 89 C/W128 C/W 75 C/W 98 C/W 59 C/W233 C/W155 C/W 39 C/W 26 C/W 24 C/W 26 C/W-65 C to +150 C300 C2000VNote 2:Note 3:Note 4:Absolute Maximum Ratings indicate limits beyond which damage to the device may ing Ratings indicate conditions for which the device is intended to befunctional, but do not guarantee specific performance limits. For guaranteedspecifications and test conditions, see the Electrical Characteristics. Theguaranteed specifications apply only for the test conditions listed. Some performancecharacteristics may degrade when the device is not operated under the listed testconditions.

The maximum power dissipation must be derated at elevated temperatures and isdictated by Tjmax (maximum junction temperature), ThetaJA (package junction toambient thermal resistance), and TA (ambient temperature). The maximum allowablepower dissipation at any temperature is Pdmax = (Tjmax - TA)/ThetaJA or the numbergiven in the Absolute Maximum Ratings, whichever is lower.

For supply voltages less than +15V, the absolute maximum input voltage is equal tothe supply voltage.

Human body model, 100 pF discharged through 1.5k Ohms.

3元器件交易网M101A-X REV 1A0MICROCIRCUIT DATA SHEETElectrical CharacteristicsDC PARAMETERS(The following conditions apply to all the following parameters, unless otherwise specified.)DC:+Vcc = +20V, Vcm = 0V, Rs = 50 ohmsSYMBOLVioPARAMETERInput OffsetVoltageCONDITIONS+Vcc = 35V, -Vcc = -5V, Vcm = -15VNOTESPIN-NAMEMIN-2-3+Vcc = 5V, -Vcc = -35V, Vcm = +15V-2-3Vcm = 0V-2-3+Vcc = 5V, -Vcc = -5V, Vcm = 0V-2-3IioInput OffsetCurrent+Vcc = 35V, -Vcc = -5V, Vcm = -15V,

Rs = 100K Ohms+Vcc = 5V, -Vcc = -35V, Vcm = +15V,

Rs = 100K OhmsVcm = 0V, Rs = 100K Ohms-10-20-10-20-10-20+Vcc = 5V, -Vcc = -5V, Vcm = 0V,

Rs = 100K OhmsIib+Input BiasCurrent+Vcc = 35V, -Vcc = -5V, Vcm = -15V,

Rs = 100K Ohms+Vcc = 5V, -Vcc = -35V, Vcm = +15V,

Rs = 100K OhmsVcm = 0V, Rs = 100K Ohms-10-20-0.1-0.1-0.1-0.1-0.1-0.1+Vcc = 5V, -Vcc = -5V, Vcm = 0V,

Rs = 100K Ohms-0.1-0.1MAX+2+3+2+3+2+3+2+3+10+20+10+20+10+20+10+2510075100UNITmVmVmVmVmVmVmVmVnAnAnAnAnAnAnAnAnAnAnAnAnAnAnAnASUB-GROUPS12, 312, 312, 312, 31, 231, 231, 231, 231, 231, 231, 231, 234元器件交易网M101A-X REV 1A0MICROCIRCUIT DATA SHEETElectrical CharacteristicsDC PARAMETERS(Continued)(The following conditions apply to all the following parameters, unless otherwise specified.)DC:+Vcc = +20V, Vcm = 0V, Rs = 50 ohmsSYMBOLIib-PARAMETERInput BiasCurrentCONDITIONS+Vcc = 35V, -Vcc = -5V, Vcm = -15V,

Rs = 100K Ohms+Vcc = 5V, -Vcc = -35V, Vcm = +15V,

Rs = 100K OhmsVcm = 0V, Rs = 100K OhmsNOTESPIN-NAMEMIN-0.1-0.1-0.1-0.1-0.1-0.1+Vcc = 5V, -Vcc = -5V, Vcm = 0V,

Rs = 100K Ohms+PSRRPower SupplyRejection RatioPower SupplyRejection RatioCommon ModeRejection RatioAdjustment forInput OffsetVoltageAdjustment forInput OffsetVoltageOutput ShortCircuit CurrentOutput ShortCircuit CurrentPower SupplyCurrent+Vcc = 15V, -Vcc = -15V, t < 25mS,

Vcm = -15V+Vcc = 15V, -Vcc = -15V, t <25mS,

Vcm = +15V+Vcc = 15V, -Vcc = -15V-60+6032.323.5DeltaVio/DeltaTDeltaIio/DeltaTTemperatureCoefficient ofInput OffsetVoltageTemperatureCoefficient ofInput OffsetCurrent+25 C < TA < +125 C+25 C < TA < -55 C+25 C < TA < +125 C+25 C < TA < -55 C1111-15-18-100-200+15+18+100+200+Vcc = 10V, -Vcc = -20V-0.1-0.1-50-100+Vcc = 20V, -Vcc = -10V-50-100Vcc = +35V to +5V, Vcm = +15V804MAX75175100+50+100+50+100UNITnAnAnAnAnAnAnAnASUB-GROUPS1, 231, 231, 231, 23uV/V1uV/V2, 3uV/V1uV/V2, 3dBmV1, 2,31, 2,31, 2,31, 2,31, 2,3123-PSRRCMRRVioADJ(+)VioADJ(-)-4mVIos+Ios-IccmAmAmAmAmAuV/ C2uV/ C3pA/ C2pA/ C35元器件交易网M101A-X REV 1A0MICROCIRCUIT DATA SHEETElectrical CharacteristicsDC PARAMETERS(Continued)(The following conditions apply to all the following parameters, unless otherwise specified.)DC:+Vcc = +20V, Vcm = 0V, Rs = 50 ohmsSYMBOLAvs-PARAMETERLarge Signal(Open Loop)Voltage GainCONDITIONSRl = 2K Ohms, Vout = -15VNOTES22Rl = 10K Ohms, Vout = -15V22Avs+Large Signal(Open Loop)Voltage GainRl = 2K Ohms, Vout = +15V22Rl = 10K Ohms, Vout = +15V22AvsLarge Signal(Open Loop)Voltage GainVcc = +5V, Rl = 2K Ohms, Vout = +2VVcc = +5V, Rl = 10K Ohms, Vout = +2VRl = 10K Ohms, Vcm = -20VRl = 2K Ohms, Vcm = -20VVop-Output VoltageSwingRl = 10K Ohms, Vcm = 20VRl = 2K ohms, Vcm = 20V22PIN-NAMEMIN50251010+16+15-16-15MAXUNITSUB-GROUPSV/mV4V/mV5, 6V/mV4V/mV5, 6V/mV4V/mV5, 6V/mV4V/mV5, 6V/mV4, 5,6V/mV4, 5,6VVVV4, 5,64, 5,64, 5,64, 5,6Vop+Output VoltageSwingAC PARAMETERS(The following conditions apply to all the following parameters, unless otherwise specified.)AC:+Vcc = +20V, Vcm = 0V, Rs = 50 OhmsSr+Sr-TR(tr)TR(os)NI(BB)NI(PC)Slew RateSlew RateRise TimeOvershootNoise BroadbandNoise PopcornAv = 1, Vin = -5V to +5VAv = 1, Vin = +5V to -5VAv = 1, Vin = 50mVAv = 1, Vin = 50mVBW = 10Hz to 5KHz, Rs = 0 OhmsBW = 10Hz to 5KHz, Rs = 100K Ohms0.30.3800251580V/uS7V/uS7nS%77uVrms7uVpk76元器件交易网M101A-X REV 1A0MICROCIRCUIT DATA SHEETElectrical CharacteristicsDC PARAMETERS: DRIFT VALUES(The following conditions apply to all the following parameters, unless otherwise specified.)DC:+Vcc = +20V, Vcm = 0V, Rs = 50 Ohms. "Delta calculations performed on JAN S and QMLV devices at groupB, subgroup 5 only".SYMBOLVioIib+Iib-PARAMETERInput OffsetVoltageInput BiasCurrentInput BiasCurrentNote 1:Note 2:Vcm = 0VVcm = 0V, Rs = 100K OhmsVcm = 0V, Rs = 100K OhmsCONDITIONSNOTESPIN-NAMEMIN-0.5-7.5-7.5MAX0.57.57.5UNITmVnAnASUB-GROUPS111Calculated parameter.

Datalog reading of K = V/mV.

7元器件交易网M101A-X REV 1A0MICROCIRCUIT DATA SHEETGraphics and DiagramsGRAPHICS#05309HRB208337HRB209384HRA409413HRB1H08CRFJ08ARLJ14ARHP000178AP000180AP000226AP000227AW10ARGCERDIP (J), 14 LEAD (B/I CKT)CERPACK (W), 10 LEAD (B/I CKT)METAL CAN, (H) TO-99,8 LEAD,.200 DIA P.C.(B/I CKT)CERDIP (J), 8 LEAD (B/I CKT)METAL CAN (H), TO-99, 8LD, .200 DIA P.C. (P/P DWG)CERDIP (J), 8 LEAD (P/P DWG)CERDIP (J), 14 LEAD (P/P DWG)METAL CAN (H), 8 LEAD (PINOUT)CERPACK (W), 10 LEAD (PINOUT)CERDIP (J), 8 LEAD (PINOUT)CERDIP (J), 14 LEAD (PINOUT)CERPACK (W), 10 LEAD (P/P DWG)DESCRIPTIONSee attached graphics following this page.8元器件交易网元器件交易网元器件交易网元器件交易网