2023年6月23日发(作者：)

1: Preparation

CIS for CANON Instruction

the CISS on the left side of the printer.

and place all the tubes at correct position.

out the small rubber plug from theair hole as picture shown above.

6pcs of air filt

2、Printer testing:

1) Check whether the printer is in normal condition, like mechanical status, lubrication status etc.

3、Installation Procedures:

(maybe the cartridges order in manual is not the same as in your printer,

1 Install cartridges

2) Print testing lines to ensure the printing head is good condition.

3) Print pictures to see whether the printing image is ok.

but their installation is the same.)

Stick the Support arm on the proper position as the above picture shown. Then place the CIS cartridges into

printer. Please press the cartridge and make sure that every cartridge is well installed according to the color

label.

2) Install the tubing.

Clamp the tube into the support arm as the above pictures shown.

3 Adjust tubing

)

Adjust the tube length and move the cartridge carriage from left to right for several times. Please make surthere will be no block and collision when the cartridges moving from one side to the other. Insure there's plentlength of tube to make the cartridge carriage can thoroughly move to the right side.

4) Checking the printing head

The tube is excessive long. The tube is twisted. Well-installed