2024年5月10日发(作者：手机中关村官网)
About Warnings
WARNING:
A WARNING indicates a potential for property damage, personal injury,
or death.
Important Information—Installing the
Hard-Drive Cable Kit
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at /regulatory_compliance.
WARNING:
To guard against electrical shock, always unplug your computer from the
electrical outlet before removing and replacing parts on the computer.
The hard-drive cable kit prevents the hard-drive cable from getting bent or
damaged, while replacing the the bottom base cover. The kit consists of a:
•
•
hard-drive flex cable
rubber bumper
To install the hard-drive cable kit:
1
Remove the bottom base cover and the battery.
NOTE:
For more information on removing the bottom base cover and the battery, see
the Service Manual at /manuals.
November 2010
2Disconnect the ends of the existing hard-drive flex cable from the
systemboard and hard-drive connectors.
3Gently peel the hard-drive flex cable away from the systemboard.
发布者：admin，转转请注明出处：http://www.yc00.com/num/1715329326a2601402.html
评论列表（0条）