2024年5月6日发(作者：联想zukz2pro评测)
1.1.1. 配置过程
FC_SW1:admin> zonecreate "vm1","1,2;1,4"
FC_SW1:admin> zonecreate "vm01","1,3;1,4"
FC_SW1:admin> zonecreate "vm2","1,2;1,5"
FC_SW1:admin> zonecreate "vm02","1,3;1,5"
FC_SW1:admin> zonecreate "vm3","1,2;1,6"
FC_SW1:admin> zonecreate "vm03","1,3;1,6"
FC_SW1:admin> zonecreate "oadb1","1,2;1,7"
FC_SW1:admin> zonecreate "oadb01","1,3;1,7"
FC_SW1:admin> zonecreate "oadb2","1,2;1,8"
FC_SW1:admin> zonecreate "oadb02","1,3;1,8"
FC_SW1:admin>
"conf1","vm1;vm2;vm3;oadb1;oadb2;vm01;vm02;vm03;oadb01;oadb02"
cfgcreate
FC_SW1:admin> cfgenable conf1
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected. If the update includes changes
to one or more traffic isolation zones, the update may result in
localized disruption to traffic on ports associated with
the traffic isolation zone changes
Do you want to enable 'conf1' configuration (yes, y, no, n): [no] y
zone config "conf1" is in effect
Updating flash ...
FC_SW1:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on Defined configuration.
Do you want to save the Defined zoning configuration only? (yes, y, no, n):
[no] y
发布者：admin，转转请注明出处：http://www.yc00.com/num/1714946766a2542181.html
评论列表（0条）