2023年12月11日发(作者：戴尔dell)

HQ136

HQ132

HQ51617could take several weeks before optimal shaving

performance is new batteries offer a shaving time of 60

5 Clean the cutter with the short-bristled side

the cleaning brush (Fig. 14).Congratulations on your purchase and welcome to

Using the applianceBrush carefully in the direction of the s! To fully benefit from the support that Philips

Shaving 6 Clean the guard with the cleaning

offers, register your product at /Your skin may need 2 or 3 weeks to get

brush (Fig. 15).omed to the Philips shaving system. 7 Slide the shaving heads back into the retaining

Importantframe and put the retaining frame back into

Read this user manual carefully before you use the

Shaving on a dry face gives the best results. 1 Push the on/off slide upwards to switch on the shaving unit (Fig. 16).appliance and save it for future shaver (Fig. 5). 8 Put the shaving unit back onto the g 2 Move the shaving heads over your skin. Make

Extra thorough cleaning- This appliance is not intended for use by

both straight and circular movements (Fig. 6).For extra thorough cleaning, put the shaving

persons (including children) with reduced

3 Push the on/off slide downwards to switch off

heads in a degreasing liquid (e.g. alcohol) every six

physical, sensory or mental capabilities, or lack

Shaving timeof experience and knowledge, unless they

the been given supervision or instruction

4 Put the protection cap on the shaver after

concerning use of the appliance by a person

use to prevent damage to the shaving

responsible for their (Fig. 7).- Children should be supervised to ensure that

they do not play with the ng and maintenanceCautionNever use scouring pads, abrasive cleaning agents

- Keep the appliance dry (Fig. 1).or aggressive liquids such as petrol or acetone to

- Use and store the appliance at a temperature

clean the appliance.

between 15°C and 35°C.

Regular cleaning guarantees better shaving

- Remove the batteries from the appliance if you

not going to use it for a month or easy and optimal cleaning, Philips Shaving Head

Compliance with standardsCleaning Spray (type no. HQ110) is available. Ask

This Philips appliance complies with all standards

your Philips dealer for ing electromagnetic fields (EMF). If handled

Note: Philips Shaving Head Cleaning Spray may not

properly and according to the instructions in this

be available in all countries. Contact the Consumer

user manual, the appliance is safe to use based on

Care Centre in your country about the availability in

scientific evidence available ing for useYou can also clean the shaver in the following way:Inserting batteriesEvery week: shaving unit and hair

chamberThe appliance runs on two R6 AA 1.5-volt

batteries. Preferably use Philips alkaline batteries. 1 Switch off the sure that your hands are dry when you

2 Clean the top of the appliance with

insert the cleaning brush (Fig. 8). 3 Press the release button (1) and remove the

1 Remove the lid of the battery

shaving unit (2) (Fig. 9).compartment (Fig. 2) 4 Clean the inside of the hair chamber with the

2 Place two batteries in the battery

cleaning brush (Fig. 10).compartment (Fig. 3). 5 Clean the inside of the shaving unit with the

Note: Make sure the + and - indications on the

cleaning brush (Fig. 11).batteries match the indications in the battery

6 Put the shaving unit back onto the two months: shaving headsNote: The shaver does not work if the batteries have

1 Switch off the placed incorrectly. 2 Press the release button (1) and remove the

3 Put the lid of the battery compartment back

shaving unit (2) (Fig. 9).onto the appliance. First insert the top part of

3 To remove the retaining frame, push the sides

the lid (1) and then press down the bottom

of the central spring towards each other

part (2) until you hear a click (Fig. 4).(1). Then lift the retaining frame out of the

How to avoid damage due to battery

shaving unit (2) (Fig. 12).leakage 4 Slide the shaving heads out of the retaining

- Do not expose the appliance to temperatures

frame (Fig. 13).higher than 35° not mix up the cutters and the guards.- Remove the batteries if you are not going to

This is essential since each cutter has been

use the appliance for a month or with its corresponding guard for optimal

- Do not leave empty batteries in the mance. If you accidentally mix up the sets, it

2months. To remove the shaving heads, follow steps

1 to 4 described above. After cleaning, lubricate

the central point on the inside of the guards with a

drop of sewing machine oil to prevent wear of the

shaving e the shaving heads every 2 years or if they

Replacementare damaged or worn. Replace them with HQ4 Ç

Philips shaving heads only.

1 Switch off the shaver. 2 Press the release button (1) and remove the

shaving unit (2) (Fig. 9). 3 To remove the retaining frame, push the sides

of the central spring towards each other

(1). Then lift the retaining frame out of the

shaving unit (2) (Fig. 12). 4 Slide the shaving heads out of the retaining

frame and replace them with new

ones (Fig. 13). 5 Put the retaining frame back into the shaving

unit. 6 Put the shaving unit back onto the following accessories are available:Accessories- HQ4 Ç Philips shaving heads.

- HQ110 Philips Shaving Head Cleaning Spray

(not available in China).-

EnvironmentBatteries contain substances that may pollute

the environment. Do not throw away empty

batteries with the normal household waste,

but dispose of them at an official collection

point for batteries. Always remove the batteries

before you discard and hand in the appliance at

an official collection point.- Do not throw away the appliance with the

normal household waste at the end of its life,

but hand it in at an official collection point for

recycling. By doing this, you help to preserve

the environment (Fig. 17).If you need service or information or if you have

Guarantee & servicea problem, please visit the Philips website at or contact the Philips Consumer Care

Centre in your country (you find its phone number

4222.002.5009.4in the worldwide guarantee leaflet). If there is no

Consumer Care Centre in your country, go to your

local Philips tee restrictionsThe shaving heads (cutters and guards) are

not covered by the terms of the international

guarantee because they are subject to chapter summarises the most common

Troubleshootingproblems you could encounter with the

appliance. If you are unable to solve the problem

with the information below, contact the Consumer

Care Centre in your country.

ProblemPossible causeSolutionReduced

shaving

The shaving heads Clean the shaver dirty.‘Cleaning and maintenance’. See chapter

Long hairs obstruct

the shaving the cutters and guards with the

cleaning brush supplied.‘Cleaning and maintenance’. See chapter

The shaving heads

are damaged or

Replace the shaving .‘Replacement’. See chapter

The shaver

does not work

The batteries are

when I push

e the batteries.‘Preparing for use’. See chapter

the on/off

slide batteries

have been placed

Make sure the + and - indications on

batteries match the indications in

the battery compartment (see chapter

‘Preparing for use’).Skin to get used to

our skin needs Skin irritation during the first 2-3 weeks

the Philips shaving

of use is normal. After this period, the skin

tion usually disappears.34222.002.5009.4剃须时间两节新电池可供 60 分钟剃须。产品简介感谢您的惠顾，欢迎光临飞利浦！为了您能充分享受飞利浦提供的支持服务，请登陆 /welcome 网站注册您的产品。使用本产品剃须您的皮肤可能需要 2 到 3 周才能适应飞利浦剃须系统。在干爽的面部剃须效果最佳。 向上推动开/关滑钮以接通剃须刀电源。 (图 5) 将剃须刀头在皮肤上移动。作直线和迂回动作。 (图 6) 向下推动开/关滑钮以关闭剃须刀电源。 使用之后用保护盖盖好剃须刀，以防剃须刀头受损。 (图 7)注意事项使用产品之前，请仔细阅读本用户手册，并妥善保管以供日后参考。警告- 本产品不打算由肢体不健全、感觉或精神上有障碍或缺乏相关经验和知识的人（包括儿童）使用，除非有负责他们安全的人对 用清洁刷的短毛一侧清洁刀片。 (图 14)按箭头方向仔细刷净。 用清洁刷清洁网罩。 (图 15) 滑动剃须刀头，将其重新安装到固定架上，然后将固定架重新安装到剃须刀头部件上。 (图 16) 将剃须刀头部件重新安装到剃须刀上。极其彻底的清洁如需彻底清洁，则应每隔六个月将剃须刀头浸入脱脂液（如酒精）清洗。按照上述步骤 1 至

4 取下剃须刀头。清洗完成后，向网罩内的中心点滴入一滴缝纫机油，以防剃须刀头磨损。更换剃须刀头应每 2 年更换一次，损坏或磨损时也应加以更换。只能用 HQ4 Ç 飞利浦剃须刀头他们使用本产品进行监督或指导。- 应照看好儿童，确保他们不玩耍该产品。注意- 保持产品干燥。 (图 1)- 必须在 15 摄氏度至 35 摄氏度之间的温度下使用和存放本产品。 - 如果超过一个月不使用本产品，请从产品中取出电池。符合标准这款飞利浦产品符合关于电磁场 (EMF) 的相关标准。据目前的科学证明，如果正确使用并按照本用户手册中的说明进行操作，本产品是安全的。使用准备插入电池产品使用两节 R6 AA 1.5 伏电池。最好使用飞利浦碱性电池。装入电池之前，双手要保持干燥。 取下电池仓盖 (图 2) 将两节电池放入电池仓。 (图 3)注意： 确保电池的正负极指示与电池仓内的正负指示一致。注意： 如果电池装错，则剃须刀就不会工作。 将电池仓盖装回到产品。首先插入仓盖的顶部 (1)，然后按下底部 (2)，直到听到“咔哒”一声。 (图 4)如何避免因电池泄漏而引起的损坏- 切勿将产品暴露在温度高于 35°C 的环境中。- 如果一个月或一个月以上不使用本产品，则将电池取出。- 切勿将耗尽的电池留在产品中。4清洁和保养不要使用钢丝绒、研磨性清洁剂或腐蚀性液体（例如汽油或丙酮）来清洁产品。 为保证更好的剃须效果，剃须刀必须定期清洗。为了更方便有效地清洁剃须刀，特推出飞利浦剃须刀头清洁喷雾剂（型号 HQ110）。有关信息，请咨询飞利浦家庭小电器客户服务部。注意： 飞利浦剃须刀头清洁喷雾剂并非所有国家/地区都有销售。请向当地的客户服务中心了解是否有售。您也可以用下列方式清洁剃须刀：每周：剃须刀头部件和胡茬储藏室 关闭剃须刀。 用清洁刷清洁产品顶部。 (图 8) 按下释放钮 (1)，取下剃须刀头部件 (2)。 (图 9) 用清洁刷清洁胡茬储藏室的内侧。 (图 10) 用清洁刷清洁剃须刀头部件的内侧。 (图 11) 将剃须刀头部件重新安装到剃须刀上。每两个月：清洁剃须刀头 关闭剃须刀。 按下释放钮 (1)，取下剃须刀头部件 (2)。 (图 9) 要取下固定架，请捏拢中央弹簧的两侧 (1)。然后向上提起固定架，将其从剃须刀头部件中取出 (2)。 (图 12) 将剃须刀头滑离固定架。 (图 13)不要将刀片和网罩混合在一起。这一点很重要，因为每组刀片和网罩都已相互磨合得很好，可获得最佳剃须效果。如果不小心将它们弄混，剃须刀将需要数周时间才能恢复到最佳剃须性能。进行更换。

 关闭剃须刀。 按下释放钮 (1)，取下剃须刀头部件 (2)。 (图 9) 要取下固定架，请捏拢中央弹簧的两侧 (1)。然后向上提起固定架，将其从剃须刀头部件中取出 (2)。 (图 12) 将剃须刀头从固定架上滑出，用新的剃须刀头更换。 (图 13) 将固定架重新安装到剃须刀头部件上。 将剃须刀头部件重新安装到剃须刀上。附件可选配以下附件：- HQ4Ç飞利浦剃须刀头。

- HQ110 飞利浦剃须刀头清洁喷雾剂（不在中国出售）环境- 电池含有可能会污染环境的物质。不要将耗尽的电池与一般的生活垃圾一同弃置，而应将其交给官方回收站。丢弃产品时，一定要将电池取出，或将其送到官方指定的回收站。- 弃置产品时，请不要将其与一般生活垃圾堆放在一起；应将其交给官方指定的回收中心。这样做有利于环保。 (图 17)保修与服务如果您需要服务或信息，或者有任何疑问，请访问飞利浦网站：。您也可与您所在地的飞利浦顾客服务中心联系（可从全球保修卡中找到其电话号码）。如果您的所在地没有飞利浦顾客服务中心，则可以与当地的飞利浦经销商联系。保修限制由于剃须刀头（刀片和网罩）属于易磨损物品，因此不在国际保修条款的涵盖范围之列。故障种类和处理方法本章归纳了使用本产品时最可能遇到的问题。如果您无法根据下面的信息解决问题，请与贵国（地区）的飞利浦客户服务中心联系。

4222.002.5009.4问题可能的原因解决方法剃须性能下剃须刀头很脏。彻底清洁剃须刀。见“清洁和保养”降。一章。过长的胡须堵塞了用随附的清洁刷清洁刀片和网罩。剃须刀头。见“清洁和保养”一章。剃须刀头已损坏或更换剃须刀头。见“更换”一章。磨损。向上推动开/电池已耗尽。更换电池。见“使用准备”一章。关滑钮时剃须刀不工作。电池放置不正确。确保电池的正负极指示与电池仓内的正负极指示一致（见“使用准备”一章）。皮肤过敏。您的皮肤需要一定开始使用时的 2-3 周内，皮肤过敏是的时间来适应飞利正常情况。在此之后，通常不再会出浦剃须刀。现皮肤过敏现象。54222.002.5009.4