2024年4月7日发(作者：)

配电室停送电倒闸操作流程

英文回答：

To start the process of shutting off power in a

distribution room, there are several key steps to follow.

First, it is crucial to inform all relevant personnel that

the power will be cut off, ensuring that everyone is aware

of the situation. This can be done through a verbal

announcement or by posting signs in the area.

Next, I would locate the main switch or circuit breaker

that controls the power supply to the distribution room.

This switch is typically labeled and may be located near

the entrance of the room. I would then turn off the main

switch to cut off the power supply to the room.

After turning off the main switch, I would proceed to

the individual circuit breakers or switches that control

power to specific areas or equipment within the

distribution room. I would turn off each of these switches

to ensure that all power sources are disconnected.

Once all switches have been turned off, I would

visually inspect the room to confirm that all equipment is

powered down. This includes checking that lights are off,

machinery is not running, and any other indicators of power

usage are inactive.

Finally, I would lock the main switch or circuit

breaker to prevent unauthorized personnel from turning the

power back on. This is an important safety measure to

ensure that no one inadvertently restores power while work

is being done in the distribution room.

中文回答：

要开始关闭配电室的电源，有几个关键步骤需要遵循。首先，

必须通知所有相关人员电源将被切断，确保每个人都意识到这种情

况。这可以通过口头通知或在区域内张贴标志来完成。

接下来，我会找到控制供电配电室的主开关或断路器。这个开

关通常有标签，并且可能位于房间入口附近。然后，我会关闭主开

关以切断房间的电源供应。

关闭主开关后，我会继续关闭控制配电室内特定区域或设备电

源的各个断路器或开关。我会关闭每个开关，以确保所有电源都已

断开。

一旦关闭所有开关，我会目视检查房间，确认所有设备都已关

闭。这包括检查灯是否关闭，机器是否停止运行，以及任何其他电

力使用指示器是否处于非活动状态。

最后，我会锁住主开关或断路器，以防止未经授权的人员重新

打开电源。这是一个重要的安全措施，以确保在配电室进行工作时

没有人会误将电源恢复。