2024年4月7日发(作者：)
红外测距仪操作流程
英文回答：
Operation Procedures for Infrared Rangefinder.
1. Power on the rangefinder. To power on the
rangefinder, press and hold the power button for 2 seconds.
The rangefinder will emit two beeps and the display will
illuminate.
2. Select the measuring mode. The rangefinder offers
two measuring modes: single-shot mode and continuous mode.
To select the single-shot mode, press the mode button once.
To select the continuous mode, press the mode button twice.
3. Point the rangefinder at the target. When using the
rangefinder, make sure to point the laser beam at the
center of the target. Grip the rangefinder with both hands
for stability and keep the rangefinder level.
4. Press the measure button. To measure the distance to
the target, press and hold the measure button. The
rangefinder will emit a short beep and the display will
show the measured distance.
5. Read the display. The display will show the measured
distance in meters, feet, or inches. The rangefinder can
measure distances up to a maximum range of 150 meters (500
feet).
6. Power off the rangefinder. To power off the
rangefinder, press and hold the power button for 2 seconds.
The rangefinder will emit two beeps and the display will
turn off.
中文回答：
红外测距仪操作流程。
1. 开启测距仪。要开启测距仪，请按住电源按钮 2 秒钟。测
距仪会发出两声蜂鸣声，显示屏会亮起。
2. 选择测量模式。测距仪提供两种测量模式，单次测量模式和
连续测量模式。要选择单次测量模式，请按一次模式按钮。要选择
连续测量模式，请按两次模式按钮。
3. 将测距仪对准目标。使用测距仪时，请确保将激光束对准目
标的中心。双手握住测距仪以保持稳定，并保持测距仪水平。
4. 按下测量按钮。要测量到目标的距离，请按住测量按钮。测
距仪会发出一声短促的蜂鸣声，显示屏会显示测量出的距离。
5. 读取显示屏。显示屏会以米、英尺或英寸显示测量出的距离。
测距仪可以测量高达 150 米（500 英尺）的最大范围内的距离。
6. 关闭测距仪。要关闭测距仪，请按住电源按钮 2 秒钟。测
距仪会发出两声蜂鸣声，显示屏会关闭。
发布者：admin，转转请注明出处：http://www.yc00.com/news/1712436122a2059174.html
评论列表（0条）